{"title":"O1 Omni STL Files","description":"\u003cp\u003ePrint-at-home STL files for the xTool O1 Omni jig system. Instant download after checkout. Every jig comes two ways: one piece for large-format printers, or split into two halves that print on any machine.\u003c\/p\u003e","products":[{"product_id":"l3d-challenge-coin-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Challenge Coin Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Challenge Coin Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing challenge coins straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 coins per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoin size:\u003c\/strong\u003e 40mm challenge coins\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094243529047,"sku":"L3D-O1-COIN-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-challenge-coin.png?v=1784841614"},{"product_id":"l3d-metal-business-card-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Metal Business Card Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Metal Business Card Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing metal business cards straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 cards per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCard size:\u003c\/strong\u003e standard credit card sized metal blanks, approximately 85 x 54mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094243660119,"sku":"L3D-O1-BIZCARD-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-business-card.png?v=1784841614"},{"product_id":"l3d-flip-lighter-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Flip Lighter Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Flip Lighter Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing flip lighters straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 lighters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLighter size:\u003c\/strong\u003e standard Zippo sized flip lighters, approximately 57 x 38 x 13mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094243889495,"sku":"L3D-O1-LIGHTER-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-flip-lighter.png?v=1784841615"},{"product_id":"l3d-glass-coaster-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Glass Coaster Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Glass Coaster Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing glass coasters straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 coasters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaster size:\u003c\/strong\u003e 90mm (9cm) glass coasters, both square and round\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094243922263,"sku":"L3D-O1-COASTER-GLASS-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-glass-coaster.png?v=1784841615"},{"product_id":"l3d-golf-ball-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Golf Ball Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Golf Ball Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing golf balls straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 10 golf balls per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall size:\u003c\/strong\u003e standard golf balls, 42.7mm (1.68 inch) diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094244020567,"sku":"L3D-O1-GOLFBALL-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-golf-ball.png?v=1784841615"},{"product_id":"l3d-leather-keychain-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Leather Keychain Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Leather Keychain Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing leather keychains straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 leather keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e PU leather keychain blanks, approximately 84 x 40mm overall\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094244184407,"sku":"L3D-O1-KEY-LTHR-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-leather-keychain.png?v=1784841615"},{"product_id":"l3d-metal-bottle-opener-keychain-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Metal Bottle Opener Keychain Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Metal Bottle Opener Keychain Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing metal bottle opener keychains straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 9 metal bottle opener keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e aluminium bottle opener keychain blanks with an opener body of approximately 63 to 65mm x 12mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094244282711,"sku":"L3D-O1-OPENER-MTL-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-metal-bottle-opener-keychain.png?v=1784841615"},{"product_id":"l3d-oval-wooden-keychain-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Oval Wooden Keychain Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Oval Wooden Keychain Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing oval wooden keychains straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 oval wooden keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e oval (track shape) wooden keychain blanks, approximately 51 x 32mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094244643159,"sku":"L3D-O1-KEY-OVAL-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-oval-wooden-keychain.png?v=1784841616"},{"product_id":"l3d-pen-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Pen Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Pen Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing pens straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 21 pens per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePen sizes:\u003c\/strong\u003e fits most standard pen sizes and shapes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094244741463,"sku":"L3D-O1-PEN-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-pen.png?v=1784841616"},{"product_id":"l3d-rectangular-wooden-keychain-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Rectangular Wooden Keychain Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Rectangular Wooden Keychain Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing rectangular wooden keychains straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e rectangular wooden keychain blanks, approximately 53 x 30mm (8mm thick)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094244938071,"sku":"L3D-O1-KEY-RECT-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-rect-wooden-keychain.png?v=1784841616"},{"product_id":"l3d-round-wooden-keychain-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Round Wooden Keychain Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Round Wooden Keychain Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing round wooden keychains straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e round wooden keychain discs, approximately 40mm diameter\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094245036375,"sku":"L3D-O1-KEY-RND-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-round-wooden-keychain.png?v=1784841616"},{"product_id":"l3d-slate-coaster-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Slate Coaster Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Slate Coaster Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing slate coasters straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 coasters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoaster size:\u003c\/strong\u003e 4 inch (approximately 100mm) slate coasters, both square and round. Natural slate varies slightly in size and thickness, which is fine: the jig allows for it.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094245167447,"sku":"L3D-O1-COASTER-SLATE-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-slate-coaster.png?v=1784841616"},{"product_id":"l3d-wooden-bottle-opener-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Wooden Bottle Opener Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Wooden Bottle Opener Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing wooden bottle openers straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 9 bottle openers per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e wooden handle bottle openers, approximately 138 x 40mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094245265751,"sku":"L3D-O1-OPENER-WOOD-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-wooden-bottle-opener.png?v=1784841616"},{"product_id":"l3d-round-wooden-bottle-opener-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Round Wooden Bottle Opener Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Round Wooden Bottle Opener Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing round wooden bottle openers straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 bottle openers per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank size:\u003c\/strong\u003e 65mm round wooden bottle openers, also fits 60mm versions\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094245527895,"sku":"L3D-O1-OPENER-RND-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-round-wooden-bottle-opener.png?v=1784841616"},{"product_id":"l3d-omni-bracket-system-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Omni Bracket System STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Omni Bracket System design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the brackets on your own 3D printer and they push straight over the edges of the O1 Omni's bed, no tools and no adhesive.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x STL file (L3D_Omni_Bracket_System_O1.STL)\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e mounts one L3D drop-in jig at a time, swappable in seconds\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe Omni Bracket System is the foundation of the L3D jig system and works with every L3D O1 drop-in jig.\u003c\/strong\u003e You only need one set: print it once and every jig in the L3D range drops straight in.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003eThe brackets print on any standard FDM printer, and so do the jigs now that every one of them includes a split version. PLA is recommended and no supports are needed. We print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the brackets for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make using the bracket system\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54094245560663,"sku":"L3D-O1-BRACKET-STL","price":9.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-bracket-system.png?v=1784841616"},{"product_id":"l3d-metal-wallet-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Metal Wallet Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Metal Wallet Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing metal card-holder wallets straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 wallets per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e metal card-holder wallets, standard credit card sized RFID style\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54102067609943,"sku":"L3D-O1-WALLET-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl2-metal-wallet.png?v=1784841617"},{"product_id":"the-o1-jig-vault-16-files","title":"The O1 Jig Vault: Volume 1 | 16 STL Files for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003e\u003cstrong\u003eThe original L3D jig range for the xTool O1 Omni in one download.\u003c\/strong\u003e Volume 1 of The O1 Jig Vault contains the first 16 STL files we made for the O1 Omni: 15 jigs plus the Omni Bracket System, well under the cost of buying them one at a time.\u003c\/p\u003e\u003ch3\u003eWhat's included (16 designs, 46 STL files)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eOmni Bracket System (the quick-swap mounting rails every jig drops into)\u003c\/li\u003e\n\u003cli\u003eChallenge Coin Jig\u003c\/li\u003e\n\u003cli\u003eMetal Business Card Jig\u003c\/li\u003e\n\u003cli\u003eFlip Lighter Jig\u003c\/li\u003e\n\u003cli\u003eGlass Coaster Jig\u003c\/li\u003e\n\u003cli\u003eGolf Ball Jig\u003c\/li\u003e\n\u003cli\u003eLeather Keychain Jig\u003c\/li\u003e\n\u003cli\u003eMetal Bottle Opener Keychain Jig\u003c\/li\u003e\n\u003cli\u003eMetal Wallet Jig\u003c\/li\u003e\n\u003cli\u003eOval Wooden Keychain Jig\u003c\/li\u003e\n\u003cli\u003ePen Jig\u003c\/li\u003e\n\u003cli\u003eRectangular Wooden Keychain Jig\u003c\/li\u003e\n\u003cli\u003eRound Wooden Keychain Jig\u003c\/li\u003e\n\u003cli\u003eRound Wooden Bottle Opener Jig\u003c\/li\u003e\n\u003cli\u003eSlate Coaster Jig\u003c\/li\u003e\n\u003cli\u003eWooden Bottle Opener Jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery jig above comes as a one piece file \u003cstrong\u003eand\u003c\/strong\u003e as a split version in two halves, so the download holds 46 STL files in total. The ten newer jigs are in \u003ca href=\"\/products\/the-o1-jig-vault-volume-2-10-files\"\u003eVolume 2\u003c\/a\u003e, or get everything in \u003ca href=\"\/products\/the-o1-jig-vault-complete-26-files\"\u003eThe O1 Jig Vault: Complete\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBuy once, save on every future volume\u003c\/h3\u003e\u003cp\u003eThe Vault is a fixed set of files: the jigs listed above, exactly as they are today. New jig designs are not added to a Vault you already own. They are released as new Vault volumes instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVault owners get 10% off every future volume.\u003c\/strong\u003e Once you own any O1 Jig Vault, use code \u003cstrong\u003eVAULT10\u003c\/strong\u003e at checkout on the next volume. The code only works for Vault owners, so check out with the email address you bought your Vault with.\u003c\/p\u003e\u003ch3\u003ePrints on any 3D printer\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eEvery jig comes two ways.\u003c\/strong\u003e The original one piece file, and a split version in two halves. Each half is \u003cstrong\u003e155 x 125mm\u003c\/strong\u003e (about 6 x 5 inches), which fits a Bambu A1 mini and just about anything bigger. Both versions are in this download at no extra cost.\u003c\/p\u003e\u003cp\u003ePrefer to print in one go? The one piece files need a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S. Digital files are non-refundable once delivered, so please check your printer before you buy.\u003c\/p\u003e\u003ch3\u003eHow delivery works\u003c\/h3\u003e\u003cp\u003eYour download link arrives by email immediately after checkout. Files come with the L3D licence, and you can re-download whenever you need. Nothing physical is posted.\u003c\/p\u003e\u003ch3\u003eLicence in plain English\u003c\/h3\u003e\u003cp\u003ePrint the jigs for your own use on your own printers, as many times as you like, and sell anything you make or engrave with them. You may not sell, share or redistribute the files or the printed jigs themselves, in original or modified form.\u003c\/p\u003e\u003ch3\u003eFuture releases are not included\u003c\/h3\u003e\u003cp\u003eVolume 1 contains the 16 designs listed above and nothing more. It does not include Volume 2, and it does not include any jig released in the future. New jigs will be released as separate expansion volumes, sold separately, and they will not be added to this Vault after you buy it.\u003c\/p\u003e\u003cp\u003eAs a Vault owner you get 10% off each future expansion volume with code \u003cstrong\u003eVAULT10\u003c\/strong\u003e. The discount applies to Vault volumes only, not to single STL files or printed jigs.\u003c\/p\u003e\u003cp\u003ePrefer ready-printed jigs? The full physical range is on the \u003ca href=\"\/pages\/xtool-o1-omni-hub\"\u003eO1 Omni hub\u003c\/a\u003e.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54835328713047,"sku":"L3D-OMNI-VAULT16-STL","price":79.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/vault-volume-1.png?v=1790362563"},{"product_id":"l3d-baseball-pickleball-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Baseball \u0026 Pickleball Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Baseball \u0026amp; Pickleball Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing baseballs and pickleballs straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 balls per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e regulation baseballs (about 73 to 75mm) and standard 74mm pickleballs\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165727670615,"sku":"L3D-O1-BALL-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-baseball-pickleball.png?v=1790357557"},{"product_id":"l3d-rectangular-tin-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Rectangular Tin Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Rectangular Tin Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing hinged metal tins straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 4 tins per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e hinged rectangular metal tins, approximately 95 x 60mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165728915799,"sku":"L3D-O1-TIN-RECT-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-rectangular-tin.png?v=1790357558"},{"product_id":"l3d-wooden-dice-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Wooden Dice Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Wooden Dice Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing wooden dice straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 10 dice per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e wooden dice in 3cm, 4cm or 5cm, mixed freely in the same run\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165729177943,"sku":"L3D-O1-DICE-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-wooden-dice.png?v=1790357559"},{"product_id":"l3d-dog-tag-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Dog Tag Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Dog Tag Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing dog tags straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 18 dog tags per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e standard dog tags, approximately 50 x 30mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165729571159,"sku":"L3D-O1-DOGTAG-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-dog-tag.png?v=1790357560"},{"product_id":"l3d-wine-stopper-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Wine Stopper Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Wine Stopper Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing wine stopper tops straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 27 wine stoppers per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e T-shaped wine stoppers with a wooden top\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165729702231,"sku":"L3D-O1-STOPPER-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-wine-stopper.png?v=1790357560"},{"product_id":"l3d-round-tin-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Round Tin Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Round Tin Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing screw top tins straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 10 tins per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e 30ml (1oz) screw top tins, either way up so you can print lids and bases\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165739303255,"sku":"L3D-O1-TIN-RND-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-round-tin.png?v=1790357642"},{"product_id":"l3d-leather-patch-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Leather Patch Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Leather Patch Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing leather patches straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 patches per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e faux leather patches in four shapes: rectangle, curved hat patch, circle and oval\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165739368791,"sku":"L3D-O1-PATCH-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-leather-patch.png?v=1790357643"},{"product_id":"l3d-round-metal-disc-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Round Metal Disc Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Round Metal Disc Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing metal discs straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 21 discs per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e round metal discs in 25mm, 30mm and 35mm, one row of seven per size\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165739532631,"sku":"L3D-O1-DISC-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-round-metal-disc.png?v=1790357643"},{"product_id":"l3d-electronic-lighter-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Electronic Lighter Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Electronic Lighter Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing electronic lighters straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 11 lighters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e slim electronic (push button) disposable lighters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165739663703,"sku":"L3D-O1-LIGHTER-ELEC-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-electronic-lighter.png?v=1790357644"},{"product_id":"l3d-flint-lighter-jig-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Flint Lighter Jig STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe original L3D Flint Lighter Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing flint lighters straight away.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e3x STL files: the one piece jig, plus the left and right halves of the split version\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCapacity \u0026amp; Blank Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 11 lighters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlank type:\u003c\/strong\u003e flint wheel disposable lighters\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eImportant: requires the L3D Omni Bracket System (available separately as a printed set or as an STL).\u003c\/strong\u003e One bracket set works with the entire L3D jig range.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTwo versions are included, so this prints on any 3D printer.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSplit version:\u003c\/strong\u003e two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne piece version:\u003c\/strong\u003e 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLA is recommended, no supports are needed, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the jig for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make with the jig\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55165739696471,"sku":"L3D-O1-LIGHTER-FLINT-STL","price":7.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-flint-lighter.png?v=1790357645"},{"product_id":"the-o1-jig-vault-volume-2-10-files","title":"The O1 Jig Vault: Volume 2 | 10 New STL Files for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003e\u003cstrong\u003eThe ten new L3D jigs for the xTool O1 Omni in one download.\u003c\/strong\u003e Volume 2 of The O1 Jig Vault holds the STL files for every jig added to the range in September 2026, at the same price per jig as Volume 1 and well under the cost of buying them one at a time.\u003c\/p\u003e\u003ch3\u003eWhat's included (10 jigs plus the Omni Bracket System, 31 STL files)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eElectronic Lighter Jig\u003c\/li\u003e\n\u003cli\u003eFlint Lighter Jig\u003c\/li\u003e\n\u003cli\u003eDog Tag Jig\u003c\/li\u003e\n\u003cli\u003eLeather Patch Jig\u003c\/li\u003e\n\u003cli\u003eRound Tin Jig\u003c\/li\u003e\n\u003cli\u003eRectangular Tin Jig\u003c\/li\u003e\n\u003cli\u003eWine Stopper Jig\u003c\/li\u003e\n\u003cli\u003eWooden Dice Jig\u003c\/li\u003e\n\u003cli\u003eBaseball \u0026amp; Pickleball Jig\u003c\/li\u003e\n\u003cli\u003eRound Metal Disc Jig\u003c\/li\u003e\n\u003cli\u003eOmni Bracket System (the quick-swap mounting rails every jig drops into)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery jig above comes as a one piece file \u003cstrong\u003eand\u003c\/strong\u003e as a split version in two halves. The Omni Bracket System is included too, so Volume 2 works on its own even if you do not own Volume 1. That makes 31 STL files in total.\u003c\/p\u003e\u003ch3\u003eAlready own The O1 Jig Vault?\u003c\/h3\u003e\u003cp\u003eVolume 2 is your expansion. It contains the ten new jigs, costs the same per jig as the Vault you bought, and comes with its own copy of the Omni Bracket System so every volume works on its own. Use code \u003cstrong\u003eVAULT10\u003c\/strong\u003e at checkout for a further 10% off.\u003c\/p\u003e\u003ch3\u003eBuy once, save on every future volume\u003c\/h3\u003e\u003cp\u003eThe Vault is a fixed set of files: the jigs listed above, exactly as they are today. New jig designs are not added to a Vault you already own. They are released as new Vault volumes instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVault owners get 10% off every future volume.\u003c\/strong\u003e Once you own any O1 Jig Vault, use code \u003cstrong\u003eVAULT10\u003c\/strong\u003e at checkout on the next volume. The code only works for Vault owners, so check out with the email address you bought your Vault with.\u003c\/p\u003e\u003ch3\u003ePrints on any 3D printer\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eEvery jig comes two ways.\u003c\/strong\u003e The original one piece file, and a split version in two halves. Each half is \u003cstrong\u003e155 x 125mm\u003c\/strong\u003e (about 6 x 5 inches), which fits a Bambu A1 mini and just about anything bigger. Both versions are in this download at no extra cost.\u003c\/p\u003e\u003cp\u003ePrefer to print in one go? The one piece files need a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S. Digital files are non-refundable once delivered, so please check your printer before you buy.\u003c\/p\u003e\u003ch3\u003eHow delivery works\u003c\/h3\u003e\u003cp\u003eYour download link arrives by email immediately after checkout. Files come with the L3D licence, and you can re-download whenever you need. Nothing physical is posted.\u003c\/p\u003e\u003ch3\u003eLicence in plain English\u003c\/h3\u003e\u003cp\u003ePrint the jigs for your own use on your own printers, as many times as you like, and sell anything you make or engrave with them. You may not sell, share or redistribute the files or the printed jigs themselves, in original or modified form.\u003c\/p\u003e\u003ch3\u003eFuture releases are not included\u003c\/h3\u003e\u003cp\u003eVolume 2 contains the 10 jigs and the Omni Bracket System listed above, and nothing more. It does not include the Volume 1 jigs, or any jig released in the future. New jigs will be released as separate expansion volumes, sold separately, and they will not be added to this Vault after you buy it.\u003c\/p\u003e\u003cp\u003eAs a Vault owner you get 10% off each future expansion volume with code \u003cstrong\u003eVAULT10\u003c\/strong\u003e. The discount applies to Vault volumes only, not to single STL files or printed jigs.\u003c\/p\u003e\u003cp\u003ePrefer ready-printed jigs? The full physical range is on the \u003ca href=\"\/pages\/xtool-o1-omni-hub\"\u003eO1 Omni hub\u003c\/a\u003e.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55166084645207,"sku":"L3D-OMNI-VAULT-V2-STL","price":49.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/vault-volume-2.png?v=1790362538"},{"product_id":"the-o1-jig-vault-complete-26-files","title":"The O1 Jig Vault: Complete | All 26 STL Files for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003e\u003cstrong\u003eEvery L3D jig file for the xTool O1 Omni in one download.\u003c\/strong\u003e The complete O1 Jig Vault brings Volume 1 and Volume 2 together: all 25 jigs plus the Omni Bracket System, 26 designs in all. It now also includes the Omni Bracket System XL at no extra cost, so you can run three jigs at once on the O1 Omni's Standard Baseplate. It is the lowest price per file we offer, and cheaper than buying the two volumes separately.\u003c\/p\u003e\u003ch3\u003eWhat's included (26 designs plus the Omni Bracket System XL, 78 STL files)\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFrom Volume 1\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOmni Bracket System (the quick-swap mounting rails every jig drops into)\u003c\/li\u003e\n\u003cli\u003eChallenge Coin Jig\u003c\/li\u003e\n\u003cli\u003eMetal Business Card Jig\u003c\/li\u003e\n\u003cli\u003eFlip Lighter Jig\u003c\/li\u003e\n\u003cli\u003eGlass Coaster Jig\u003c\/li\u003e\n\u003cli\u003eGolf Ball Jig\u003c\/li\u003e\n\u003cli\u003eLeather Keychain Jig\u003c\/li\u003e\n\u003cli\u003eMetal Bottle Opener Keychain Jig\u003c\/li\u003e\n\u003cli\u003eMetal Wallet Jig\u003c\/li\u003e\n\u003cli\u003eOval Wooden Keychain Jig\u003c\/li\u003e\n\u003cli\u003ePen Jig\u003c\/li\u003e\n\u003cli\u003eRectangular Wooden Keychain Jig\u003c\/li\u003e\n\u003cli\u003eRound Wooden Keychain Jig\u003c\/li\u003e\n\u003cli\u003eRound Wooden Bottle Opener Jig\u003c\/li\u003e\n\u003cli\u003eSlate Coaster Jig\u003c\/li\u003e\n\u003cli\u003eWooden Bottle Opener Jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eFrom Volume 2\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eElectronic Lighter Jig\u003c\/li\u003e\n\u003cli\u003eFlint Lighter Jig\u003c\/li\u003e\n\u003cli\u003eDog Tag Jig\u003c\/li\u003e\n\u003cli\u003eLeather Patch Jig\u003c\/li\u003e\n\u003cli\u003eRound Tin Jig\u003c\/li\u003e\n\u003cli\u003eRectangular Tin Jig\u003c\/li\u003e\n\u003cli\u003eWine Stopper Jig\u003c\/li\u003e\n\u003cli\u003eWooden Dice Jig\u003c\/li\u003e\n\u003cli\u003eBaseball \u0026amp; Pickleball Jig\u003c\/li\u003e\n\u003cli\u003eRound Metal Disc Jig\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eIncluded free\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOmni Bracket System XL (holds three jigs side by side on the 330 x 420mm Standard Baseplate; two bracket files, print two of each)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEvery jig comes as a one piece file \u003cstrong\u003eand\u003c\/strong\u003e as a split version in two halves. Add the two Omni Bracket System XL files and the download holds 78 STL files in total. The XL brackets are 221mm long, so they need a printer bed of at least 225mm. New jig designs are released as separate downloads.\u003c\/p\u003e\u003ch3\u003eAlready own Volume 1?\u003c\/h3\u003e\u003cp\u003eYou only need \u003ca href=\"\/products\/the-o1-jig-vault-volume-2-10-files\"\u003eVolume 2\u003c\/a\u003e, which adds the ten new jigs without paying again for the ones you have. Vault owners get 10% off it with code \u003cstrong\u003eVAULT10\u003c\/strong\u003e.\u003c\/p\u003e\u003ch3\u003eBuy once, save on every future volume\u003c\/h3\u003e\u003cp\u003eThe Vault is a fixed set of files: the files listed above, exactly as they are today. New jig designs are not added to a Vault you already own. They are released as new Vault volumes instead.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVault owners get 10% off every future volume.\u003c\/strong\u003e Once you own any O1 Jig Vault, use code \u003cstrong\u003eVAULT10\u003c\/strong\u003e at checkout on the next volume. The code only works for Vault owners, so check out with the email address you bought your Vault with.\u003c\/p\u003e\u003ch3\u003ePrints on any 3D printer\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eEvery jig comes two ways.\u003c\/strong\u003e The original one piece file, and a split version in two halves. Each half is \u003cstrong\u003e155 x 125mm\u003c\/strong\u003e (about 6 x 5 inches), which fits a Bambu A1 mini and just about anything bigger. Both versions are in this download at no extra cost.\u003c\/p\u003e\u003cp\u003ePrefer to print in one go? The one piece files need a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S. Digital files are non-refundable once delivered, so please check your printer before you buy.\u003c\/p\u003e\u003ch3\u003eHow delivery works\u003c\/h3\u003e\u003cp\u003eYour download link arrives by email immediately after checkout. Files come with the L3D licence, and you can re-download whenever you need. Nothing physical is posted.\u003c\/p\u003e\u003ch3\u003eLicence in plain English\u003c\/h3\u003e\u003cp\u003ePrint the jigs for your own use on your own printers, as many times as you like, and sell anything you make or engrave with them. You may not sell, share or redistribute the files or the printed jigs themselves, in original or modified form.\u003c\/p\u003e\u003ch3\u003eFuture releases are not included\u003c\/h3\u003e\u003cp\u003e\"Complete\" means every O1 jig available when Volume 2 was released in September 2026, plus the Omni Bracket System XL: the files listed above and nothing more. It does not include any jig released after that. New jigs will be released as separate expansion volumes, sold separately, and they will not be added to this Vault after you buy it.\u003c\/p\u003e\u003cp\u003eAs a Vault owner you get 10% off each future expansion volume with code \u003cstrong\u003eVAULT10\u003c\/strong\u003e. The discount applies to Vault volumes only, not to single STL files or printed jigs.\u003c\/p\u003e\u003cp\u003ePrefer ready-printed jigs? The full physical range is on the \u003ca href=\"\/pages\/xtool-o1-omni-hub\"\u003eO1 Omni hub\u003c\/a\u003e.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55166085235031,"sku":"L3D-OMNI-VAULT-ALL26-STL","price":119.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/vault-complete.png?v=1790362554"},{"product_id":"l3d-omni-bracket-system-xl-stl-for-xtool-o1-omni-uv-printer-digital-download","title":"L3D Omni Bracket System XL STL for xTool O1 Omni UV Printer | Digital Download","description":"\u003cp\u003eThe L3D Omni Bracket System XL as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the brackets on your own 3D printer, push them onto the O1 Omni's Standard Baseplate and run three L3D jigs side by side.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2x STL files: the two mirrored XL brackets (print two of each for the full set of four)\u003c\/li\u003e\n\u003cli\u003eL3D digital file licence (text file)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e the Standard Baseplate (330 x 420mm) on ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e three L3D drop-in jigs at once\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003exTool Studio:\u003c\/strong\u003e every blank sits inside the printable area of the Standard Baseplate, so one scan picks them all up ready for your designs (see the screenshots above)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsing the Mini Baseplate?\u003c\/strong\u003e You need the \u003ca href=\"\/products\/l3d-omni-bracket-system-stl-for-xtool-o1-omni-uv-printer-digital-download\"\u003eOmni Bracket System STL\u003c\/a\u003e instead.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWorks with every L3D O1 drop-in jig, whether you buy it printed or print it yourself.\u003c\/p\u003e\u003ch3\u003ePrint Guidance\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eEach bracket is 221 x 48 x 22mm (about 8.7 x 1.9 x 0.9 inches), so your printer needs a bed at least 225mm long.\u003c\/strong\u003e A Bambu Lab A1, P1S or X1, or a Prusa MK4, has room. Smaller printers such as the Bambu Lab A1 mini cannot print them.\u003c\/p\u003e\u003cp\u003ePLA is recommended, and we print ours in matte white PLA.\u003c\/p\u003e\u003ch3\u003eLicence Summary\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint the brackets for your own use on your own printers\u003c\/li\u003e\n\u003cli\u003eSell what you make using the bracket system\u003c\/li\u003e\n\u003cli\u003eDo not share, resell or redistribute the file, or any modified version of it\u003c\/li\u003e\n\u003cli\u003eDo not sell or give away printed copies of the brackets\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":55524941300055,"sku":"L3D-O1-BRACKET-XL-STL","price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/stl-omni-bracket-system-xl.png?v=1792510506"}],"url":"https:\/\/www.l3daccessories.com\/collections\/o1-stl-files.oembed","provider":"L3D Accessories","version":"1.0","type":"link"}