{"title":"xTool O1 Omni UV Printer Jigs","description":"\u003cp\u003ePrecision quick-swap jigs for the xTool O1 Omni UV printer. Designed and tested by Chris on a real O1 Omni, 3D printed in matte white to match your machine. Every jig fits all O1 Omni editions and drops into the Omni Bracket System for repeatable batch printing of coins, coasters, keychains, golf balls and more.\u003c\/p\u003e","products":[{"product_id":"challenge-coin-jig-xtool-o1-omni","title":"Challenge Coin Jig for xTool O1 Omni UV Printer | 40mm Coins","description":"\u003cp\u003eBatch print 14 challenge coins at once on your xTool O1 Omni, with every coin held in exactly the right place. Load your blanks into the jig, drop it into the Omni Bracket System, run Pixel-Scan, and print the lot in one pass.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Challenge Coin Jig (holds 14x 40mm coins)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 coins per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoin size:\u003c\/strong\u003e 40mm challenge coins\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eTested with \u003ca href=\"https:\/\/uk.xtool.com\/products\/blank-commemorative-coins-5pcs\" target=\"_blank\" rel=\"noopener\"\u003exTool 40mm blank commemorative coins\u003c\/a\u003e. Any standard 40mm challenge coin blank will fit.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for \u003cstrong\u003e40mm diameter\u003c\/strong\u003e challenge coins. The linked xTool blanks fit perfectly. Please measure your coins before ordering: coins larger than 40mm will not fit, and noticeably smaller coins may sit loose.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e14 coins in one pass.\u003c\/strong\u003e Stop printing coins one at a time. Load the full jig and let the O1 Omni do the work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRepeatable alignment.\u003c\/strong\u003e The jig always drops into the brackets in the same position, so your design lines up run after run.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuick-swap system.\u003c\/strong\u003e Finished with coins? Lift the jig out and drop in any other L3D jig in seconds. No tools, no re-alignment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePixel-Scan friendly.\u003c\/strong\u003e The matte white surface scans cleanly under the O1 Omni's vision system.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Coins shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072528273751,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/coin-jig-hero-v7.png?v=1784479927"},{"product_id":"omni-bracket-system-xtool-o1-omni","title":"Omni Bracket System for xTool O1 Omni UV Printer | Quick-Swap Jig Mounting Rails","description":"\u003cp\u003eThe foundation of the L3D jig system for your xTool O1 Omni. Two end brackets push straight over the edges of the O1 Omni's bed, no tools and no adhesive. Every L3D drop-in jig locates into them in exactly the same position, so you can swap jigs in seconds and keep repeatable batch alignment with Pixel-Scan.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e2x Omni end brackets\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eThe Omni Bracket System is required for all L3D drop-in jigs.\u003c\/strong\u003e You only ever need one set. Buy it once and every jig in the L3D range drops straight in.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e mounts one L3D drop-in jig at a time, swappable in seconds\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWorks With\u003c\/h3\u003e\u003cp\u003eThe full L3D drop-in jig range, including jigs for challenge coins, metal business cards, flip lighters, glass coasters, golf balls, keychains, pens and bottle openers.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePush-fit installation over the bed edges, no tools or adhesive required\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment: every jig locates in the same position every time\u003c\/li\u003e\n\u003cli\u003eQuick-swap system lets you change jigs in seconds between jobs\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery bracket set is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Jigs and blanks shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072553898327,"sku":null,"price":19.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/bracket-hero-v2.png?v=1784481614"},{"product_id":"golf-ball-jig-xtool-o1-omni","title":"Golf Ball Jig for xTool O1 Omni UV Printer | Standard Golf Balls","description":"\u003cp\u003eBatch print 10 golf balls at once on your xTool O1 Omni. Load your golf balls into the jig, drop it into your brackets, run Pixel-Scan and print all 10 in one pass. Logos, event branding, personalised gifts, done in minutes instead of one at a time.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Golf Ball Jig (holds 10 x standard golf balls)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 10 golf balls per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eNo special blanks needed. The jig fits any standard-size golf ball, so you can print directly on balls you already have or on any budget multipack.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for standard golf balls, \u003cstrong\u003e42.7mm (1.68 inch) diameter\u003c\/strong\u003e. All regulation golf balls are this size, so any standard ball fits.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatch capacity of 10 balls per run for fast, efficient production\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment so every ball sits in exactly the same spot, print after print\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish keeps Pixel-Scan happy with clean, reliable detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Golf balls shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072554946903,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-golf.png?v=1784480655"},{"product_id":"pen-jig-xtool-o1-omni","title":"Pen Jig for xTool O1 Omni UV Printer | Fits Most Pen Sizes","description":"\u003cp\u003eBatch print 21 pens at once on your xTool O1 Omni. Load your pen blanks into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass. No fiddly alignment, no wasted bed space.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Pen Jig (holds 21 x pens)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 21 pens per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePen sizes:\u003c\/strong\u003e fits most standard pen sizes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eWorks brilliantly with \u003ca href=\"https:\/\/share.temu.com\/2UbryWn6nLB\" target=\"_blank\" rel=\"noopener\"\u003epen blanks on Temu (option 1)\u003c\/a\u003e and \u003ca href=\"https:\/\/share.temu.com\/94ZQhgvgI7B\" target=\"_blank\" rel=\"noopener\"\u003epen blanks on Temu (option 2)\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eFits most standard pen sizes and shapes. Very slim, oversized, or unusually shaped pens may not sit securely, so test one pen before committing to a full batch.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 21 pens in a single run instead of one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment for consistent prints across every batch\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Pens shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072555405655,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-pen.png?v=1784480686"},{"product_id":"metal-business-card-jig-xtool-o1-omni","title":"Metal Business Card Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 5 metal business cards at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Metal Business Card Jig (holds 5 x metal business cards)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 cards per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned for standard credit card sized metal blanks, such as these \u003ca href=\"https:\/\/www.aliexpress.com\/item\/1005011886931310.html\" target=\"_blank\" rel=\"noopener\"\u003emetal business card blanks on AliExpress\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for standard credit card sized metal business cards, \u003cstrong\u003eapproximately 85 x 54mm\u003c\/strong\u003e. The linked blanks fit. Please check your card dimensions before ordering: larger cards will not fit the pockets.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 5 cards in a single run instead of aligning them one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment: every card sits in exactly the same position every time\u003c\/li\u003e\n\u003cli\u003eQuick-swap system: drops into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Business cards shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072559403351,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero_bizcard.png?v=1784480741"},{"product_id":"leather-keychain-jig-xtool-o1-omni","title":"Leather Keychain Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 5 leather keychains at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print all 5 in one pass. Personalised keychains, logos and gifts without fiddly one-at-a-time setups.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Leather Keychain Jig (holds 5 x leather keychains)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 leather keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned around these \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0CGDB5JD1\" target=\"_blank\" rel=\"noopener\"\u003eleather keychain blanks on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned around the linked PU leather keychain blanks, \u003cstrong\u003eapproximately 84 x 40mm\u003c\/strong\u003e overall. If you are using different blanks, please compare their dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatch capacity of 5 keychains per run for fast, efficient production\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment so every blank sits in exactly the same spot, print after print\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish keeps Pixel-Scan happy with clean, reliable detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Keychains shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072559731031,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-leather.png?v=1784480727"},{"product_id":"rectangular-wooden-keychain-jig-xtool-o1-omni","title":"Rectangular Wooden Keychain Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 14 rectangular wooden keychains at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass. No fiddly alignment, no wasted bed space.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Rectangular Wooden Keychain Jig (holds 14 x rectangular wooden keychains)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned around \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0FMYCYB2P\" target=\"_blank\" rel=\"noopener\"\u003erectangular wooden keychain blanks on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for rectangular wooden keychain blanks, \u003cstrong\u003eapproximately 53 x 30mm (8mm thick)\u003c\/strong\u003e. The linked blanks fit. If you are using different blanks, please compare their dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 14 keychains in a single run instead of one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment for consistent prints across every batch\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Keychains shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072560615767,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-rect-keychain.png?v=1784480794"},{"product_id":"flip-lighter-jig-xtool-o1-omni","title":"Flip Lighter Jig for xTool O1 Omni UV Printer | Fits Zippo \u0026 Compatible Lighters","description":"\u003cp\u003eBatch print 5 flip lighters at once on your xTool O1 Omni. Load your lighters into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Flip Lighter Jig (holds 5 x flip lighters)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 5 lighters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eFits Zippo and Zippo-style flip lighters, such as these \u003ca href=\"https:\/\/www.aliexpress.com\/item\/1005009084202323.html\" target=\"_blank\" rel=\"noopener\"\u003eflip lighter blanks on AliExpress\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for standard Zippo sized flip lighters, \u003cstrong\u003eapproximately 57 x 38 x 13mm\u003c\/strong\u003e. Genuine Zippo lighters and same-size copies fit. Please check your lighter dimensions before ordering: oversized novelty lighters will not fit.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 5 lighters in a single run instead of aligning them one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment: every lighter sits in exactly the same position every time\u003c\/li\u003e\n\u003cli\u003eQuick-swap system: drops into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Lighters shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072566874455,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero_lighter.png?v=1784480809"},{"product_id":"metal-bottle-opener-keychain-jig-xtool-o1-omni","title":"Metal Bottle Opener Keychain Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 9 metal bottle opener keychains at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print all 9 in one pass. Perfect for personalised gifts, branded merchandise and wedding favours.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Metal Bottle Opener Keychain Jig (holds 9 x metal bottle opener keychains)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 9 metal bottle opener keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned around these \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0C1YB9BS1\" target=\"_blank\" rel=\"noopener\"\u003emetal bottle opener keychain blanks on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned around the linked aluminium bottle opener keychain blanks, with an opener body of \u003cstrong\u003eapproximately 63 to 65mm x 12mm\u003c\/strong\u003e. If you are using different blanks, please compare their dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatch capacity of 9 keychains per run for fast, efficient production\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment so every blank sits in exactly the same spot, print after print\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish keeps Pixel-Scan happy with clean, reliable detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Keychains shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072567365975,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-metal.png?v=1784480815"},{"product_id":"round-wooden-keychain-jig-xtool-o1-omni","title":"Round Wooden Keychain Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 14 round wooden keychains at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass. No fiddly alignment, no wasted bed space.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Round Wooden Keychain Jig (holds 14 x round wooden keychains)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned around \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0D1KGFHS8\" target=\"_blank\" rel=\"noopener\"\u003eround wooden keychain blanks on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for round wooden keychain discs, \u003cstrong\u003eapproximately 40mm diameter\u003c\/strong\u003e. The linked blanks fit. If you are using different blanks, please compare their dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 14 keychains in a single run instead of one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment for consistent prints across every batch\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Keychains shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072568185175,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-round-keychain.png?v=1784480873"},{"product_id":"glass-coaster-jig-xtool-o1-omni","title":"Glass Coaster Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 3 glass coasters at once on your xTool O1 Omni. Load your coasters into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Glass Coaster Jig (holds 3 x glass coasters)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 coasters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eWorks with standard glass coasters, such as these \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0F8VVWHG3\" target=\"_blank\" rel=\"noopener\"\u003esquare glass coasters on Amazon\u003c\/a\u003e and these \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0B12PKL52\" target=\"_blank\" rel=\"noopener\"\u003eround glass coasters on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for \u003cstrong\u003e90mm (9cm)\u003c\/strong\u003e glass coasters, both square and round. The linked blanks fit. Please measure your coasters before ordering: coasters larger than 90mm will not fit, and noticeably smaller ones may sit loose.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 3 coasters in a single run instead of aligning them one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment: every coaster sits in exactly the same position every time\u003c\/li\u003e\n\u003cli\u003eQuick-swap system: drops into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate positioning\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Coasters shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072579031383,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero_coaster.png?v=1784480878"},{"product_id":"oval-wooden-keychain-jig-xtool-o1-omni","title":"Oval Wooden Keychain Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 14 oval wooden keychains at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print all 14 in one pass. The biggest capacity keychain jig in the range, perfect for markets, events and bulk orders.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Oval Wooden Keychain Jig (holds 14 x oval wooden keychains)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 14 oval wooden keychains per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned around these \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0FMY8YL4J\" target=\"_blank\" rel=\"noopener\"\u003eoval wooden keychain blanks on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned around the linked oval (track shape) wooden keychain blanks, \u003cstrong\u003eapproximately 51 x 32mm\u003c\/strong\u003e. If you are using different blanks, please compare their dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBatch capacity of 14 keychains per run for fast, efficient production\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment so every blank sits in exactly the same spot, print after print\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish keeps Pixel-Scan happy with clean, reliable detection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Keychains shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072582570327,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-oval.png?v=1784480891"},{"product_id":"slate-coaster-jig-xtool-o1-omni","title":"Slate Coaster Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 3 slate coasters at once on your xTool O1 Omni. Load your coasters into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass. No fiddly alignment, no wasted bed space.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Slate Coaster Jig (holds 3 x slate coasters)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 3 coasters per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eWorks brilliantly with \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B09441RD6T\" target=\"_blank\" rel=\"noopener\"\u003esquare slate coasters on Amazon\u003c\/a\u003e and \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0D22RYL45\" target=\"_blank\" rel=\"noopener\"\u003eround slate coasters on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned for \u003cstrong\u003e4 inch (approximately 100mm)\u003c\/strong\u003e slate coasters, both square and round. Natural slate varies slightly in size and thickness, which is fine: the jig allows for it.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 3 coasters in a single run instead of one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment for consistent prints across every batch\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Coasters shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072583717207,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-slate-coaster.png?v=1784480964"},{"product_id":"wooden-bottle-opener-jig-xtool-o1-omni","title":"Wooden Bottle Opener Jig for xTool O1 Omni UV Printer","description":"\u003cp\u003eBatch print 9 wooden bottle openers at once on your xTool O1 Omni. Load your blanks into the jig, drop it into your brackets, run Pixel-Scan and print the whole batch in one pass. No fiddly alignment, no wasted bed space.\u003c\/p\u003e\u003ch3\u003eWhat's Included\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1x Wooden Bottle Opener Jig (holds 9 x wooden bottle openers)\u003c\/li\u003e\n\u003cli\u003eFree xTool Studio alignment template for this jig (digital file, sent with your order)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eRequires the Omni Bracket System, sold separately.\u003c\/strong\u003e One bracket set works with the entire L3D jig range. If you already own it, you're ready to go.\u003c\/p\u003e\u003ch3\u003eSpecs \u0026amp; Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits:\u003c\/strong\u003e ALL editions of the xTool O1 Omni (Single UV, Dual-Head UV, UV + DT Fabric)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCapacity:\u003c\/strong\u003e 9 bottle openers per run\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e 3D printed matte white PLA, colour matched to the O1 Omni\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDesigned and tested:\u003c\/strong\u003e by Chris on a real O1 Omni\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCompatible Blanks\u003c\/h3\u003e\u003cp\u003eDesigned around \u003ca href=\"https:\/\/www.amazon.co.uk\/dp\/B0CBNZSDPP\" target=\"_blank\" rel=\"noopener\"\u003ewooden bottle opener blanks on Amazon\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eBlank Size Guide\u003c\/h3\u003e\u003cp\u003eDesigned around the linked wooden handle bottle openers, \u003cstrong\u003eapproximately 138 x 40mm\u003c\/strong\u003e. If you are using different blanks, please compare their dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eProduct Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003ePrint 9 bottle openers in a single run instead of one at a time\u003c\/li\u003e\n\u003cli\u003eRepeatable alignment for consistent prints across every batch\u003c\/li\u003e\n\u003cli\u003eQuick-swap design drops straight into the Omni Bracket System in seconds\u003c\/li\u003e\n\u003cli\u003eMatte white finish plays nicely with Pixel-Scan for accurate placement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003ePlease Note\u003c\/h3\u003e\u003cp\u003eEvery jig is 3D printed to order just for you. Because of that, made-to-order items cannot be returned or exchanged, and orders cannot be cancelled once printing has started. Minor surface texture from the printing process is normal and does not affect performance. If anything arrives damaged or incorrect, contact us and we will put it right. Bottle openers shown in photos are for demonstration and are not included.\u003c\/p\u003e\u003cp\u003ePrinting on a blank we do not cover yet? \u003ca href=\"\/pages\/xtool-o1-omni-hub#request-jig\"\u003eSend a jig request\u003c\/a\u003e. The most requested ideas get designed first.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":54072589451607,"sku":null,"price":23.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/hero-bottle-opener.png?v=1784481058"}],"url":"https:\/\/www.l3daccessories.com\/collections\/xtool-o1-omni-uv-printer-jigs.oembed","provider":"L3D Accessories ","version":"1.0","type":"link"}