{"product_id":"adjustable-screen-stand-stl-xtool-f1-f2-ultra","title":"Adjustable Screen Stand STL File for xTool Touchscreen (F1 Ultra, F2 Ultra, F2) – Digital Download","description":"\u003ch2 data-start=\"294\" data-end=\"354\"\u003e⚠️ DIGITAL DOWNLOAD – NO PHYSICAL PRODUCT WILL BE SHIPPED\u003c\/h2\u003e\n\u003cp data-start=\"356\" data-end=\"486\"\u003eThis listing is for a \u003cstrong data-start=\"378\" data-end=\"403\"\u003e3D printable STL file\u003c\/strong\u003e of the Adjustable Screen Stand.\u003cbr data-start=\"435\" data-end=\"438\"\u003eYou are purchasing the digital design file only.\u003c\/p\u003e\n\u003cp data-start=\"488\" data-end=\"519\"\u003eNo physical stand will be sent.\u003c\/p\u003e\n\u003chr data-start=\"521\" data-end=\"524\"\u003e\n\u003ch2 data-start=\"526\" data-end=\"545\"\u003eProduct Overview\u003c\/h2\u003e\n\u003cp data-start=\"547\" data-end=\"726\"\u003eImprove your viewing angle and workspace ergonomics by printing your own fully adjustable screen stand, designed specifically for the official xTool detachable touchscreen module.\u003c\/p\u003e\n\u003cp data-start=\"728\" data-end=\"981\"\u003eThe factory touchscreen sits flat on your desk, which can make viewing uncomfortable depending on your working position. This design allows you to tilt your screen from a low angle up to near vertical, giving you full control over your viewing position.\u003c\/p\u003e\n\u003cp data-start=\"983\" data-end=\"1101\"\u003eThe stand has been engineered for balance, stability, and secure grip while still allowing easy removal of the screen.\u003c\/p\u003e\n\u003cp data-start=\"1103\" data-end=\"1150\"\u003eDesigned for professional setups and daily use.\u003c\/p\u003e\n\u003chr data-start=\"1152\" data-end=\"1155\"\u003e\n\u003ch2 data-start=\"1157\" data-end=\"1183\"\u003eWhat You Are Purchasing\u003c\/h2\u003e\n\u003cp data-start=\"1185\" data-end=\"1309\"\u003e• STL file(s) required to print the adjustable screen stand\u003cbr data-start=\"1244\" data-end=\"1247\"\u003e• Assembly and print guidance text file (included in download)\u003c\/p\u003e\n\u003cp data-start=\"1311\" data-end=\"1379\"\u003eYou will need your own 3D printer and filament to produce the stand.\u003c\/p\u003e\n\u003chr data-start=\"1381\" data-end=\"1384\"\u003e\n\u003ch2 data-start=\"1386\" data-end=\"1415\"\u003eKey Features of the Design\u003c\/h2\u003e\n\u003cp data-start=\"1417\" data-end=\"1665\"\u003e• Designed for the official xTool detachable touchscreen\u003cbr data-start=\"1473\" data-end=\"1476\"\u003e• Fully adjustable tilt range\u003cbr data-start=\"1505\" data-end=\"1508\"\u003e• Stable, balanced geometry\u003cbr data-start=\"1535\" data-end=\"1538\"\u003e• Secure screen retention design\u003cbr data-start=\"1570\" data-end=\"1573\"\u003e• Rear ventilation hole pattern to assist airflow\u003cbr data-start=\"1622\" data-end=\"1625\"\u003e• Clean, professional design aesthetic\u003c\/p\u003e\n\u003chr data-start=\"1667\" data-end=\"1670\"\u003e\n\u003ch2 data-start=\"1672\" data-end=\"1688\"\u003eCompatibility\u003c\/h2\u003e\n\u003cp data-start=\"1690\" data-end=\"1755\"\u003eDesigned for the official xTool detachable touchscreen used with:\u003c\/p\u003e\n\u003cp data-start=\"1757\" data-end=\"1807\"\u003e• xTool F1 Ultra\u003cbr data-start=\"1773\" data-end=\"1776\"\u003e• xTool F2 Ultra\u003cbr data-start=\"1792\" data-end=\"1795\"\u003e• xTool F2\u003c\/p\u003e\n\u003cp data-start=\"1809\" data-end=\"1907\"\u003eIf future machines use the same touchscreen module dimensions, this design may also be compatible.\u003c\/p\u003e\n\u003cp data-start=\"1909\" data-end=\"1976\"\u003eNot compatible with third-party screens or non-xTool display units.\u003c\/p\u003e\n\u003cp data-start=\"1978\" data-end=\"2041\"\u003ePlease verify your screen dimensions before printing if unsure.\u003c\/p\u003e\n\u003chr data-start=\"2043\" data-end=\"2046\"\u003e\n\u003ch2 data-start=\"2048\" data-end=\"2085\"\u003eImportant – Print \u0026amp; Fitment Notice\u003c\/h2\u003e\n\u003cp data-start=\"2087\" data-end=\"2356\"\u003e• Print at 100% scale\u003cbr data-start=\"2108\" data-end=\"2111\"\u003e• Ensure your printer is properly calibrated\u003cbr data-start=\"2155\" data-end=\"2158\"\u003e• Dimensional accuracy will affect fitment\u003cbr data-start=\"2200\" data-end=\"2203\"\u003e• Minor sanding or tuning may be required depending on printer tolerances\u003cbr data-start=\"2276\" data-end=\"2279\"\u003e• Recommended print settings are included in the downloadable guidance file\u003c\/p\u003e\n\u003cp data-start=\"2358\" data-end=\"2434\"\u003eResults may vary based on printer quality, material choice, and calibration.\u003c\/p\u003e\n\u003chr data-start=\"2436\" data-end=\"2439\"\u003e\n\u003ch2 data-start=\"2441\" data-end=\"2466\"\u003eDigital Product Policy\u003c\/h2\u003e\n\u003cp data-start=\"2468\" data-end=\"2661\"\u003e• This is a digital download only\u003cbr data-start=\"2501\" data-end=\"2504\"\u003e• No physical product will be shipped\u003cbr data-start=\"2541\" data-end=\"2544\"\u003e• No refunds, returns, or exchanges are offered on digital files\u003cbr data-start=\"2608\" data-end=\"2611\"\u003e• Files are delivered immediately after purchase\u003c\/p\u003e\n\u003cp data-start=\"2663\" data-end=\"2742\"\u003ePlease ensure you understand that this is a digital STL file before purchasing.\u003c\/p\u003e\n\u003chr data-start=\"2744\" data-end=\"2747\"\u003e\n\u003ch2 data-start=\"2749\" data-end=\"2773\"\u003eUsage \u0026amp; Licence Terms\u003c\/h2\u003e\n\u003cp data-start=\"2775\" data-end=\"3029\"\u003e• Personal use only\u003cbr data-start=\"2794\" data-end=\"2797\"\u003e• Commercial resale of printed stands is strictly prohibited\u003cbr data-start=\"2857\" data-end=\"2860\"\u003e• Redistribution of STL files is prohibited\u003cbr data-start=\"2903\" data-end=\"2906\"\u003e• Selling modified or derivative versions is prohibited\u003cbr data-start=\"2961\" data-end=\"2964\"\u003e• Uploading to file-sharing sites or marketplaces is prohibited\u003c\/p\u003e\n\u003cp data-start=\"3031\" data-end=\"3097\"\u003eAll intellectual property remains the property of L3D Accessories.\u003c\/p\u003e\n\u003cp data-start=\"3099\" data-end=\"3155\"\u003eLegal action may be pursued for commercial infringement.\u003c\/p\u003e\n\u003chr data-start=\"3157\" data-end=\"3160\"\u003e\n\u003ch2 data-start=\"3162\" data-end=\"3175\"\u003eDisclaimer\u003c\/h2\u003e\n\u003cp data-start=\"3177\" data-end=\"3542\"\u003e• This is an aftermarket digital design and is not affiliated with or endorsed by xTool.\u003cbr data-start=\"3265\" data-end=\"3268\"\u003e• Users are responsible for safe printing, assembly, and use.\u003cbr data-start=\"3329\" data-end=\"3332\"\u003e• Always ensure the stand is placed on a stable, level surface before use.\u003cbr data-start=\"3406\" data-end=\"3409\"\u003e• L3D Accessories accepts no liability for damage resulting from improper printing, incorrect scaling, unstable placement, or misuse.\u003c\/p\u003e","brand":"L3D Accessories","offers":[{"title":"Default Title","offer_id":52845681443159,"sku":null,"price":12.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0865\/9370\/0183\/files\/Adjustable_Screen_Stand_1.png?v=1771692599","url":"https:\/\/www.l3daccessories.com\/products\/adjustable-screen-stand-stl-xtool-f1-f2-ultra","provider":"L3D Accessories ","version":"1.0","type":"link"}