15 Temu Laser Engraving Blanks Tested and Ranked
I bought 15 popular laser engraving blanks from Temu, engraved them all on the xTool F2 and ranked them from worst to...
Read the guide →
xTool F2 Cleaning Routine: Fan, Lens and Cover
My full xTool F2 cleaning routine for the rear fan, laser lens and cover, plus how to clean the F1 Ultra extractor fa...
Read the guide →
How to Engrave Patterns on Irregular Shapes in xTool Studio
Trace any odd-shaped item with the vector pen, offset the outline, lay a pattern over it and use Combine, Subtract to...
Read the guide →
xTool F2 Slide Extension: Setup and Batch Engraving Guide
Fitting the xTool slide extension to the F2, then every mode: long engravings, same design batch processing and diffe...
Read the guide →
How to Engrave Personalized Dart Flights with the xTool F2
Engrave photos and team logos onto black dart flights with the xTool F2's infrared laser, using a jig, a mask that fo...
Read the guide →
How to Engrave Personalized Golf Tees with the xTool F2
Engrave seven personalized wooden golf tees at a time on the xTool F2, with text setup, framing each tee, my tested b...
Read the guide →
How to Engrave Cork Coasters with the xTool F2 (Logos and Photos)
Engrave cork coasters with the xTool F2's blue diode: a vector logo with my tested settings and a faster processing p...
Read the guide →
How to Engrave PU Leather Keychains with the xTool F2
Engrave a PU leather keychain on the xTool F2 with a vector design and a name curved around the bottom, using a jig, ...
Read the guide →
How to Engrave Wooden Keychains with the xTool F2
Engrave a personalized wooden keychain on the xTool F2, from holding the blank and setting up a vector design with a ...
Read the guide →
How to Engrave Pens with the xTool F2: Anodized Aluminum and Bamboo
Engrave names, logos and icons on anodized aluminum and bamboo pens with the xTool F2: holding them in a jig, sizing ...
Read the guide →
How to Engrave Personalized Photos on Drink Cans with the xTool F2
Engrave photos and logos onto a black aluminum drink can with the xTool F2: holding the can, focusing, getting Auto a...
Read the guide →
How to Engrave Detailed Photos on Dog Tags with the xTool F2
Shape a photo to fit a dog tag with the pen tool and a mask in xTool Studio, then engrave it on black anodized alumin...
Read the guide →
How to Engrave Aluminum Business Cards with the xTool F2 (Photos, Text and QR Codes)
My full workflow and tested settings for black anodized aluminum business cards on the xTool F2, from text, icons and...
Read the guide →
How to Engrave Photos on Black Acrylic with the xTool F2
Engrave a photo onto matte black cast acrylic with the xTool F2, cut it out with rounded corners and make a little st...
Read the guide →
How to Engrave Photos on K9 Crystal with the xTool F2
You don't need a UV laser for photos on crystal. My step by step method for K9 crystal keyrings and blocks on the xTo...
Read the guide →
xTool F Series Auto Mode (ACS), August 2026: How to Set It Up and Use It
The August 2026 Auto mode (ACS) update lets an F2, F2 Ultra or F2 Ultra UV focus itself, find your item and place you...
Read the guide →
Hip Flask Engraving Settings for the xTool F2
How I engrave an image and curved text onto a black anodized hip flask with the xTool F2, with tested infrared settin...
Read the guide →
How to Engrave Photos on Glass with the xTool F2 and F2 Ultra UV
My full process for photos on glass coasters and cups: tempera paint on the xTool F2, straight onto the glass on the ...
Read the guide →
Black Marking on Stainless Steel with the xTool F2
The exact settings and steps I use for a jet black annealed mark on stainless steel with the xTool F2 infrared laser,...
Read the guide →
3D Relief Engraving on Wood with the xTool F2
How I turn a plain wooden coaster into a 3D relief engraving with the xTool F2 diode, using a low relief image, a two...
Read the guide →
xTool F2 Tumbler Engraving with the RA3 Rotary: Full Wrap Guide
How I engrave a full wrap design around a tumbler with the xTool F2 and RA3 rotary, from building the rotary and leve...
Read the guide →
xTool F2 Beginner's Guide: Setup, Calibration and Your First Engraving
Everything I'd tell a new xTool F2 owner, in order: safety, diode or infrared, what the accessories are for, focusing...
Read the guide →
xTool F2 Settings: The 10 I Use Most on Real Projects
The exact settings I use on my xTool F2 for black stainless steel, tumblers, anodized aluminum, slate, glass, wood, c...
Read the guide →23 guides for xTool F2