xTool F2 Ultra UV Setup: Calibration and Your First Engraving
New to the xTool F2 Ultra UV? How to connect it to xTool Studio, run the calibration with the right card, check the d...
Read the guide →
How to Use Curved Surface Mode in xTool Studio
Step by step through xTool Studio's curved material mode on a golf ball: framing the measuring area, setting the meas...
Read the guide →
How to Find Laser Photo Engraving Settings Without Guessing
My three-stage test grid method for dialing in power, dot duration and DPI for photo engraving, shown on black acryli...
Read the guide →
3D Emboss Engraving on Wood with the xTool F2 Ultra UV
How I carve CNC-style 3D relief into wooden coasters with the xTool F2 Ultra UV: Embossment mode, making a depth map ...
Read the guide →
Engraving Photos on Stainless Steel with the xTool F2 and F2 Ultra UV
How I get crisp, high contrast photos on stainless steel that you can see from every angle, with the image prep in xT...
Read the guide →
Rotary Glass Engraving on the xTool F2 Ultra UV
My full setup for photos and text on a drinking glass with the xTool F2 Ultra UV and RA3 rotary: measuring, leveling ...
Read the guide →
Slate Coaster Engraving on the xTool F2 and F2 Ultra UV
How I set up, design and engrave slate coasters: a crisp white logo on the xTool F2 Ultra UV and a family photo on th...
Read the guide →
How to Engrave Photos Inside Crystal with the xTool F2 Ultra UV
Everything I do to put a photo inside a K9 crystal on the xTool F2 Ultra UV: building the riser, fitting the lens, bo...
Read the guide →8 guides for xTool F2 Ultra UV