L3D Slate Coaster Jig STL for xTool O1 Omni UV Printer

The original L3D Slate Coaster Jig design as a print-at-home STL file for the xTool O1 Omni UV Printer. This is an instant digital download, nothing is shipped: print the jig on your own 3D printer and start batch printing slate coasters straight away.

What's Included

• 3x STL files: the one piece jig, plus the left and right halves of the split version
• L3D digital file licence (text file)

Capacity & Blank Compatibility

• Capacity: 3 coasters per run
• Coaster size: 4 inch (approximately 100mm) slate coasters, both square and round. Natural slate varies slightly in size and thickness, which is fine: the jig allows for it.

Important: requires the L3D Omni Bracket System (available separately as a printed set or as an STL). One bracket set works with the entire L3D jig range.

Print Guidance

Two versions are included, so this prints on any 3D printer.

• Split version: two halves, each 155 x 125mm (about 6 x 5 inches). If your printer can manage that you can print it, and almost every printer can. Even a Bambu A1 mini has room to spare.
• One piece version: 310 x 125mm (about 12 x 5 inches). Needs a plate of at least 320mm on its longest side, such as the Bambu Lab H2D or H2S.

PLA is recommended, no supports are needed, and we print ours in matte white PLA.

Licence Summary

• Print the jig for your own use on your own printers
• Sell what you make with the jig
• Do not share, resell or redistribute the file, or any modified version of it
• Do not sell or give away printed copies of the jig

This is a digital product, supplied immediately after checkout, and non-refundable once delivery has begun. This does not affect your rights if a file is faulty.