L3D Laser Library › F2 Ultra UV

xTool F2 Ultra UV laser settings

Every tested L3D setting for the xTool F2 Ultra UV in one place: 41 recipes across 4 material guides, from acrylic to aluminium. Pick a material below, or search the whole library from the hub.

41
Tested settings
4
Material guides

Before you burn

  • Every recipe here is a tested starting point, not a guarantee. Materials vary between brands and even batches.
  • Always run a small test on a spare piece or a hidden corner before committing to the real job.
  • No two machines are calibrated exactly the same. Check your focus, start conservative, and adjust in small steps.

Pick your material

Acrylic
9 settings → Aluminium
8 settings → Wood
7 settings → Stainless Steel
6 settings →

Free F2 Ultra UV settings to get you started

F2 Ultra UV UV

Pine Wood Rounds (Deep dark engrave)

Engrave · Deep dark engrave

51%
Power
101
Speed mm/s
499
LPC
2
Passes
40
Freq kHz
Solid wood & boards VectorField lens
F2 Ultra UV UV

Beechwood Coaster

Engrave

81%
Power
2501
Speed mm/s
249
LPC
100
Layers
40
Freq kHz
Solid wood & boards Photo / bitmap3D Emboss15° angleField lens

Descend Z every 10 layers by 0.01mm.

Perfect jig for this: 4-Inch Coaster Jig →
F2 Ultra UV UV

Slate Coaster (Painted white then black)

Engrave · Painted white then black

94%
Power
299
Dot dur.
401
DPI
1
Pass
40
Freq kHz
Slate VectorField lens

Prep: Light sand + spray paint coats
Sand first then a couple layers thin white spray paint, then a layer of black.

Perfect jig for this: 4-Inch Coaster Jig →
F2 Ultra UV UV

Stainless Steel Military Dog Tag (Engraves slate grey)

Engrave · Engraves slate grey

79%
Power
49
Speed mm/s
501
LPC
1
Pass
40
Freq kHz
Bare VectorField lens
Perfect jig for this: Dog Tag Jig →
F2 Ultra UV UV

Stainless Steel Military Dog Tag (Deep engrave)

Engrave · Deep engrave

99%
Power
21
Speed mm/s
499
LPC
1
Pass
40
Freq kHz
Bare VectorField lens
Perfect jig for this: Dog Tag Jig →
F2 Ultra UV UV

Stainless Steel Military Dog Tag (Engraves white)

Engrave · Engraves white

39%
Power
1299
Speed mm/s
501
LPC
1
Pass
40
Freq kHz
Bare VectorField lens
Perfect jig for this: Dog Tag Jig →

Unlock all 41 F2 Ultra UV settings

You are looking at 3 of 41 tested F2 Ultra UV settings. Create a free L3D account to unlock every setting and every material guide on this page, with prep tips and notes included.

Create a free account or log in

Free forever, no card needed. By creating an account you agree to receive member emails from L3D: new tested settings, early access to new jigs, and member-only tips. Unsubscribe at any time.

Jigs built for the F2 Ultra UV

Line up every job perfectly with L3D jigs designed and tested on this machine.

Shop Ultra jigs →
← Back to the full Laser Library