L3D Laser Library › F2

xTool F2 laser settings

Every tested L3D setting for the xTool F2 in one place: 91 recipes across 7 material guides, from leatherette to stainless steel. Pick a material below, or search the whole library from the hub.

91
Tested settings
7
Material guides

Before you burn

  • Every recipe here is a tested starting point, not a guarantee. Materials vary between brands and even batches.
  • Always run a small test on a spare piece or a hidden corner before committing to the real job.
  • No two machines are calibrated exactly the same. Check your focus, start conservative, and adjust in small steps.

Pick your material

Leatherette
24 settings → Stainless Steel
16 settings → Wood
12 settings → Aluminium
11 settings → Glass
6 settings → Plastic
6 settings → Coated Metal
4 settings →

Free F2 settings to get you started

F2 Infrared

Slate Coaster (Painted white then black)

Engrave · Painted white then black

49-99%
Power
61
Dot dur.
399
LPC
1
Pass
Slate Photo / bitmap

Prep: Sand, spray white, then black topcoat
sanded, paint white then black

F2 Blue diode

xTool Rose Gold Jewellery

Engrave

99%
Power
21
Speed mm/s
299
LPC
Jewellery & annealing Vector45° angleCrosshatch
F2 Blue diode

Pine Disc

Engrave

94%
Power
449
Speed mm/s
201
LPC
1
Pass
Solid wood & boards Vector
F2 Infrared

Stainless Credit Card Bottle Opener (Engraves black)

Engrave · Engraves black

99%
Power
11
Speed mm/s
299
LPC
1
Pass
Bare VectorCrosshatch+7 mm defocus

Focus, then add 7mm to the focus value. Crosshatch to get a black engrave.

Perfect jig for this: Metal Business Card Jig →

Unlock all 91 F2 settings

You are looking at 3 of 91 tested F2 settings. Create a free L3D account to unlock every setting and every material guide on this page, with prep tips and notes included.

Create a free account or log in

Free forever, no card needed. By creating an account you agree to receive member emails from L3D: new tested settings, early access to new jigs, and member-only tips. Unsubscribe at any time.

Jigs built for the F2

Line up every job perfectly with L3D jigs designed and tested on this machine.

Shop F2 jigs →
← Back to the full Laser Library