L3D Laser Library › F2 Ultra

xTool F2 Ultra laser settings

Every tested L3D setting for the xTool F2 Ultra in one place: 45 recipes across 5 material guides, from brass & copper to stainless steel. Pick a material below, or search the whole library from the hub.

45
Tested settings
5
Material guides

Before you burn

  • Every recipe here is a tested starting point, not a guarantee. Materials vary between brands and even batches.
  • Always run a small test on a spare piece or a hidden corner before committing to the real job.
  • No two machines are calibrated exactly the same. Check your focus, start conservative, and adjust in small steps.

Pick your material

Brass & Copper
11 settings → Stainless Steel
7 settings → Precious Metals
7 settings → Coated Metal
5 settings → Aluminium
5 settings →

Free F2 Ultra settings to get you started

F2 Ultra Fiber

Stainless Steel Tumbler (Colour marking: pink)

Engrave · Colour marking: pink

17%
Power
169
Speed mm/s
401
LPC
1
Pass
48
Freq kHz
200
Pulse ns
Drinkware (bare) VectorRotary

Tumbler Pink

F2 Ultra Blue diode

Maple Board 23mm

Cut

99%
Power
99
Speed mm/s
300
Passes
Sheet & ply Vector
F2 Ultra Fiber

Brass Coin

Engrave

96%
Power
2201
Speed mm/s
299
LPC
30
Freq kHz
350
Pulse ns
Brass Photo / bitmap3D Emboss1° angle

Descend at the Z axis (on)

F2 Ultra Fiber

Brass Sheet 0.5mm

Engrave

89%
Power
399
Speed mm/s
201
LPC
16
Passes
30
Freq kHz
500
Pulse ns
Brass Vector

Wobble - diameter 0.05 mm distance 0.015

F2 Ultra Fiber

Brass Sheet 2mm

Cut

99%
Power
99
Speed mm/s
50
Passes
48
Freq kHz
200
Pulse ns
Brass Vector

Wobble - Diameter (0.3), distance (0.02)

F2 Ultra Fiber

Aluminium Sheet 1mm

Cut

99%
Power
101
Speed mm/s
10
Passes
48
Freq kHz
200
Pulse ns
Bare Vector

Wobble - Diameter (0.4), distance (0.03)

F2 Ultra Blue diode

Glass

Engrave

26%
Power
301
Speed mm/s
199
LPC
1
Pass
Glassware VectorRotary

Apply marking spray before engraving.

F2 Ultra Fiber

Stainless Steel Tumbler (Colour marking: blue)

Engrave · Colour marking: blue

15%
Power
221
Speed mm/s
399
LPC
1
Pass
128
Freq kHz
200
Pulse ns
Drinkware (bare) VectorRotary

Tumbler Blue

F2 Ultra Fiber

Stainless Steel Tumbler (Colour marking: chroma (blue/pink))

Engrave · Colour marking: chroma (blue/pink)

11%
Power
101
Speed mm/s
451
LPC
1
Pass
46
Freq kHz
250
Pulse ns
Drinkware (bare) VectorRotary

Tumbler Chroma (blue/pink)

F2 Ultra Fiber

Stainless Steel Tumbler (Colour marking: purple)

Engrave · Colour marking: purple

15%
Power
89
Speed mm/s
449
LPC
1
Pass
117
Freq kHz
250
Pulse ns
Drinkware (bare) VectorRotary

Tumbler Purple

Unlock all 45 F2 Ultra settings

You are looking at 3 of 45 tested F2 Ultra settings. Create a free L3D account to unlock every setting and every material guide on this page, with prep tips and notes included.

Create a free account or log in

Free forever, no card needed. By creating an account you agree to receive member emails from L3D: new tested settings, early access to new jigs, and member-only tips. Unsubscribe at any time.

Jigs built for the F2 Ultra

Line up every job perfectly with L3D jigs designed and tested on this machine.

Shop F2 Ultra jigs →
← Back to the full Laser Library