Oval Wooden Keychain Jig STL for xTool F1 Ultra, F2 Ultra & F2 Ultra UV

Description

Engrave oval wooden keychains with precision using this digital download STL file for the xTool F1 Ultra, F2 Ultra & F2 Ultra UV. Designed to hold 50 mm × 33 mm oval wooden blanks securely, this printable jig delivers consistent alignment and clean engraving results every time. Ideal for personalised gifts, event keepsakes, and small business production. No physical product will be shipped. Instant download available after purchase.

Designed for: xTool F1 Ultra, xTool F2 Ultra, xTool F2 Ultra UV
Does not fit: xTool F1, F1 Lite, or F2

Key Features

• Designed for oval wooden keychains measuring approximately 50 mm × 33 mm
• Provides a snug fit to keep wooden blanks stable during engraving
• STL format ready for printing in PLA, PETG, or similar FDM materials
• Compatible with the xTool F1 Ultra, F2 Ultra & F2 Ultra UV using standard M4 × 0.7 mm screw positions
• Ideal for engraving names, logos, and artwork on custom wooden keyrings

What Is Included

• One STL file for the xTool F1 Ultra, F2 Ultra & F2 Ultra UV Oval Wooden Keychain Jig
• Reference image showing recommended blank orientation and setup

Compatibility

• Machine: xTool F1 Ultra, xTool F2 Ultra, xTool F2 Ultra UV
• Material: Oval wooden blanks approximately 50 mm × 33 mm
• Software: Any slicer capable of importing STL files

Important Notes

• Digital product only. No physical jig or screws are supplied.
• Wooden keyrings and other accessories shown in any images are for demonstration only.
• Manual framing is advised to ensure proper alignment due to calibration differences between machines.

Licence (please read): This STL file is for personal use only. Print the jig for your own workshop and sell anything you make with it. What is not allowed: selling or giving away the printed jig itself (original or modified), and sharing, reselling or redistributing this file or any modified version of it.

Printing Guidance

• Filament: PLA or PETG
• Layer height: 0.2 mm
• Infill: 25–35 percent
• Four or more perimeters for stability
• Always test fit the printed jig with a spare blank before engraving production pieces

Usage Notes

• Mount the jig using the M4 × 0.7 mm screws from the xTool right-angle bracket
• Insert the oval wooden blank with the engraving face upward
• Use the included XCS alignment file or frame manually before engraving

Optional FAQ

Q: Can this jig fit other oval blank sizes
A: It is optimised for 50 mm × 33 mm blanks. Other sizes may fit if proportionally scaled in your slicer.