L3D Laser Library › F2 Ultra › Brass & Copper

xTool F2 Ultra brass & copper settings

11 tried and tested brass and copper settings for the xTool F2 Ultra, covering brass and copper. Every recipe here has been run on a real F2 Ultra in the L3D workshop before being added, with prep tips and notes where they matter.

Every machine is slightly different. Treat these as proven starting points and always run a small test first.
F2 Ultra Fiber

Brass Coin

Engrave

96%
Power
2201
Speed mm/s
299
LPC
30
Freq kHz
350
Pulse ns
Brass Photo / bitmap3D Emboss1° angle

Descend at the Z axis (on)

F2 Ultra Fiber

Brass Sheet 0.5mm

Engrave

89%
Power
399
Speed mm/s
201
LPC
16
Passes
30
Freq kHz
500
Pulse ns
Brass Vector

Wobble - diameter 0.05 mm distance 0.015

F2 Ultra Fiber

Brass Sheet 2mm

Cut

99%
Power
99
Speed mm/s
50
Passes
48
Freq kHz
200
Pulse ns
Brass Vector

Wobble - Diameter (0.3), distance (0.02)

F2 Ultra Fiber

Brass Sheet 2.5mm

Cut

99%
Power
99
Speed mm/s
16
Passes
30
Freq kHz
500
Pulse ns
Brass Vector

Wobble - (On), Diameter (0.05), Distance (0.015)

F2 Ultra Fiber

Copper (Deep engrave)

Engrave · Deep engrave

99%
Power
501
Speed mm/s
299
LPC
5
Passes
30
Freq kHz
500
Pulse ns
Copper Vector45° angleCrosshatch
F2 Ultra Fiber

Copper (Clean pass)

Engrave · Clean pass

49%
Power
999
Speed mm/s
301
LPC
2
Passes
120
Freq kHz
250
Pulse ns
Copper Vector45° angleCrosshatch
F2 Ultra Fiber

Copper (Dark anneal)

Engrave · Dark anneal

99%
Power
201
Speed mm/s
299
LPC
2
Passes
30
Freq kHz
500
Pulse ns
Copper Vector45° angleCrosshatch
F2 Ultra Fiber

Brass (White engrave)

Engrave · White engrave

49%
Power
3799
Speed mm/s
201
LPC
2
Passes
30
Freq kHz
500
Pulse ns
Brass Vector45° angleCrosshatch
F2 Ultra Fiber

Brass (Clean pass)

Engrave · Clean pass

71%
Power
1501
Speed mm/s
299
LPC
2
Passes
50
Freq kHz
500
Pulse ns
Brass Vector45° angleCrosshatch
F2 Ultra Fiber

Brass (Dark engrave)

Engrave · Dark engrave

89%
Power
249
Speed mm/s
301
LPC
8
Passes
60
Freq kHz
500
Pulse ns
Brass Vector45° angleCrosshatch
F2 Ultra Fiber

Brass Sheet 0.5mm

Cut

99%
Power
101
Speed mm/s
1
Pass
30
Freq kHz
500
Pulse ns
Brass Vector

Unlock all 11 brass & copper settings

Create a free L3D account to see every tested F2 Ultra setting on this page, with prep tips and notes. No card needed, just an email.

Create a free account or log in

Free forever, no card needed. By creating an account you agree to receive member emails from L3D: new tested settings, early access to new jigs, and member-only tips. Unsubscribe at any time.

More F2 Ultra materials

Stainless Steel 7Precious Metals 7Coated Metal 5Aluminium 5

F2 Ultra + brass & copper: common questions

Why do brass recipes use so many passes?

Brass and copper reflect a lot of laser energy, so deep results are built up with many light passes rather than one heavy one. The pass counts on these cards are the tested totals.

What does the wobble setting mean on cutting recipes?

Wobble oscillates the beam in tiny circles as it travels, effectively widening the cut so thicker metal severs cleanly. The diameter and distance values noted on the card go into your software wobble settings.

Why do my results look different to yours?

Materials vary between batches and suppliers, machines drift, and focus matters. Treat every number here as a proven starting point, run a small test first, then adjust in small steps.

← Back to the full Laser Library