L3D Laser Library › F2 Ultra › Precious Metals

xTool F2 Ultra precious metals settings

7 tried and tested gold, silver, titanium and specialty metal settings for the xTool F2 Ultra, covering titanium, gold and silver. Every recipe here has been run on a real F2 Ultra in the L3D workshop before being added, with prep tips and notes where they matter.

Every machine is slightly different. Treat these as proven starting points and always run a small test first.
F2 Ultra Fiber

Titanium (Deep engrave)

Engrave · Deep engrave

99%
Power
1701
Speed mm/s
279
LPC
10
Passes
60
Freq kHz
200
Pulse ns
Titanium Vector45° angleCrosshatch
F2 Ultra Fiber

24K Gold (Deep engrave)

Engrave · Deep engrave

71%
Power
2501
Speed mm/s
199
LPC
8
Passes
30
Freq kHz
500
Pulse ns
Gold Vector45° angleCrosshatch
F2 Ultra Fiber

Titanium (Standard engrave)

Engrave · Standard engrave

99%
Power
1699
Speed mm/s
281
LPC
5
Passes
60
Freq kHz
200
Pulse ns
Titanium Vector45° angleCrosshatch
F2 Ultra Fiber

24K Gold (Polish pass)

Engrave · Polish pass

39%
Power
2499
Speed mm/s
201
LPC
2
Passes
100
Freq kHz
500
Pulse ns
Gold Vector45° angleCrosshatch
F2 Ultra Fiber

Silver (White mark)

Engrave · White mark

71%
Power
2501
Speed mm/s
199
LPC
2
Passes
30
Freq kHz
500
Pulse ns
Silver Vector45° angleCrosshatch
F2 Ultra Fiber

Silver (Standard engrave)

Engrave · Standard engrave

76%
Power
1001
Speed mm/s
239
LPC
2
Passes
46
Freq kHz
250
Pulse ns
Silver Vector45° angleCrosshatch
F2 Ultra Fiber

Silver (Deep black engrave)

Engrave · Deep black engrave

99%
Power
199
Speed mm/s
301
LPC
2
Passes
30
Freq kHz
500
Pulse ns
Silver Vector45° angleCrosshatch

Unlock all 7 precious metals settings

Create a free L3D account to see every tested F2 Ultra setting on this page, with prep tips and notes. No card needed, just an email.

Create a free account or log in

Free forever, no card needed. By creating an account you agree to receive member emails from L3D: new tested settings, early access to new jigs, and member-only tips. Unsubscribe at any time.

More F2 Ultra materials

Brass & Copper 11Stainless Steel 7Coated Metal 5Aluminium 5

F2 Ultra + precious metals: common questions

Can the fiber module really engrave gold and silver?

Yes. Precious metals engrave beautifully with the fiber module, and these recipes include tested deep engrave and polish passes so jewellery work comes out clean.

Why do these recipes use crosshatch so often?

Crosshatching runs the fill lines in two directions, which evens out the finish on reflective metals and gives a deeper, more uniform result.

Why do my results look different to yours?

Materials vary between batches and suppliers, machines drift, and focus matters. Treat every number here as a proven starting point, run a small test first, then adjust in small steps.

← Back to the full Laser Library