L3D Laser Library › F1 › Coated Metal

xTool F1 coated metal settings

4 tried and tested powder coated and painted metal settings for the xTool F1, covering powder coated and painted. Every recipe here has been run on a real F1 in the L3D workshop before being added, with prep tips and notes where they matter.

Every machine is slightly different. Treat these as proven starting points and always run a small test first.
F1 Blue diode

Powder Coated Tumbler (All colours)

Engrave · All colours

100%
Power
300
Speed mm/s
220
LPC
1
Pass
Powder coated VectorRotary

Works for all colours.

L3D-F1-013L3D Accessories Laser Library
F1 Blue diode

Metal Hip Flask 8oz (Black)

Engrave · Black

45%
Power
400
Speed mm/s
160
LPC
1
Pass
Painted Vector
L3D-F1-011L3D Accessories Laser Library
F1 Blue diode

Powder Coated Tumbler (All colours)

Engrave · All colours

100%
Power
300
Speed mm/s
220
LPC
1
Pass
Powder coated VectorRotary
L3D-F1-003L3D Accessories Laser Library
F1 Blue diode

Painted Metal Mailbox (Walmart mailboxes)

Engrave · Walmart mailboxes

53%
Power
150
Speed mm/s
120
LPC
1
Pass
Painted Vector
L3D-F1-036L3D Accessories Laser Library

Unlock all 4 coated metal settings

Create a free L3D account to see every tested F1 setting on this page, with prep tips and notes. No card needed, just an email.

Create a free account or log in

Free forever, no card needed. By creating an account you agree to receive member emails from L3D: new tested settings, early access to new jigs, and member-only tips. Unsubscribe at any time.

F1 + coated metal: common questions

Will these settings work on my brand of tumbler?

Coating thickness varies between brands and even colours, so treat these as tested starting points. Run a small test spot somewhere hidden first, then adjust power in small steps until the coating removes cleanly.

Why do some recipes mention a clean pass?

A lower power second pass sweeps away coating residue left in the engraving, which lifts the contrast and saves scrubbing. Where a recipe needs one, it is noted on the card.

Why do my results look different to yours?

Materials vary between batches and suppliers, machines drift, and focus matters. Treat every number here as a proven starting point, run a small test first, then adjust in small steps.

← Back to the full Laser Library